Machining Center
LZZ4-13 Multi-head combination drilling machine
Clicks：
Product Details
Performance characteristics:
Mainly used for the drilling of aluminum curtain wall profiles and door and window profiles, especially suitable for long material and mass production.
It is suitable for profiles with a section not exceeding 250×250 and the processing length is up to 5000mm.
Multi-head drill stand can be installed to meet the simultaneous processing of multiple groups of holes.
The feed system uses a gas-liquid damper cylinder to provide smooth feed.
The PLC control system can realize the linkage of any machine head.
Technical Parameters
Input power: 4 × 0.75KW
Power supply: 380V 50Hz
Air source: 0.5～0.8MPa
Maximum and minimum distance between two holes: 5000mm, 300mm
Maximum section size: 250 × 250mm
Drill feed stroke: 125mm
Workbench size (length × width): 300 × 300mm
Overall dimension: 5500 × 1100 × 1800mm
Power supply: 380V 50Hz
Air source: 0.5～0.8MPa
Maximum and minimum distance between two holes: 5000mm, 300mm
Maximum section size: 250 × 250mm
Drill feed stroke: 125mm
Workbench size (length × width): 300 × 300mm
Overall dimension: 5500 × 1100 × 1800mm
Online consulting
Related Products
